布线发展史

电缆测试101:Understanding Your LinkWare Report

So you used your DSX-5000 to test some recently installed copper network runs for your customer. You can easily see on your tester if the link failed or passed for the application you were testing, but now your customer wants a customized report showing the detail. 

2016 年 11 月 3 日

Understand the Wide Band Multimode Fiber (WBMMF)

2016 年 10 月 20 日

电缆测试101:There's No Gain with "Gainers"

Akin to water flowing from a small pipe into a large pipe, gainers are essentially perceived increases in optical power that occur at splice points due to variations in fiber characteristics, including core diameter, numerical apertures, mode field diameters and backscatter coefficients.

2016 年 10 月 13 日

Benefits of Using 8-Fiber Plug and Play MPO Solutions

The use of plug-and-play 12-fiber MPO solutions for multimode fiber backbones in the data center has been popular for several years, starting with 10 Gigabit Ethernet where 12-fiber MPO assemblies connect MPO-to-LC cassettes or modules that transition the 12-fiber MPO connections to 6 duplex LC connections.

2016 年 10 月 6 日

Advantage of Automated Fiber Inspection over Manual

 

Over the past decade, the amount of fiber in the data center has increased significantly due to the need for higher bandwidth between switches and the ever increasing amount of equipment requiring fiber uplinks to storage area networks (SANs), not to mention the demand for maximum availability that calls for redundant primary and secondary fiber network connections to every piece of equipment.

2016 年 9 月 28 日

Deploy and Test Shielded Cable with Category 8

 

TIA TR-42.7 铜缆布线小组委员会最近批准了 8 类布线 (TIA 568 C.2-1) - 最新的双绞对铜线系统,设计用于将来支持目前正在开发中的 IEEE 25GBASE T 和 40GBASE T 应用 - 规范。

With all the buzz surrounding Category 8, you and your customers might be wondering how exactly it will impact the deployment and testing of cabling infrastructures.

Let's take a closer look at where it will be deployed and some of the key characteristics that impact installation and testing.

2016 年 9 月 22 日

Upgrading Your Fiber Plant to 40 and 100 Gigabit Speeds

Just Now Upgrading to 10 Gig? We Didn't Forget About You

While upgrading backbone cable plants in the LAN to support 10 Gig has been going on for several years since the release of the 10GBASE-SR standard for fiber, many enterprise businesses did not previously require these types of speeds, until now.

2016 年 9 月 8 日

How to Set Up DSX-5000 for New Installation?

Getting the right setup to ensure the best test results with your DSX-5000

If you turn up to a new installation with your new DSX-5000 then it might be up to you to ensure the DSX-5000 is set up correctly. So what do you have to do?

Well, if it’s brand new out of the box, then you need to do a basic set up. But, with every new project there may need to be changes if you make installations tests in other countries or time zones with different requirements for date or time differences, or different formats for them or numbers.

2016 年 8 月 25 日