布线发展史
Goodbye 2016. You Weren’t ALL Bad
All over the news and social media, 2016 has gotten a pretty bum rap.
With everything from shootings, terrorist attacks and the weirdest presidential election in history, to exploding cell phones, scary clown threats and numerous celebrity deaths, 2016 has been denoted as the worst year ever.
2017 年 1 月 4 日
How to Save Money and Time in Testing Fibers with SmartLoop
The only way to get correct values when performing Tier 2 testing of duplex fiber links with an OTDR is via bidirectional testing that averages the measurements taken from both ends of the link.
Bidirectional testing used to involve testing the fiber from one end, walking the OTDR to the other end to test again and then averaging the two values to get the results—and it had to be done for each link.
2016 年 12 月 30 日
Testing New Cable Tester in 2017
每年的这个时间，我们总是会预测下一年测试领域的最大发展趋势是什么。
显而易见，物联网 (IoT) 将仍然是所有网络布线的主要驱动力—包括从LAN到数据中心的各个环节。对于LAN，我们将会看到比以往任何时候都多的设备仍然使用双绞线铜缆网络布线；而数据中心要求高速光纤链路，并且随着企业需要访问、发送和储存的数据越来越多，将随之扩展。
2016 年 12 月 14 日
How Accurate is Your Optical Loss Test Set?
You have just made a loss measurement using an Optical Loss Test Set (OLTS). The measurement was made to a test limit, the result was a PASS, and the margin was provided. Have you ever thought about how much margin is acceptable?
2016 年 12 月 1 日
Much to be Thankful for
There is much to be thankful for in our industry these days as market growth continues to be fueled by the IoT and big data driving the need for LAN and data center upgrades.
2016 年 11 月 23 日
Bi-Direction Testing with an OTDR
STANDARD OR APPLICATION NOTE
2016 年 11 月 17 日
电缆测试 101：How to Read the LinkWare™ PC Report
In our last 101 Series Blog, we took at closer look at everything in blue at the top of your LinkWare Report. But what if your customer wants you to explain the detail and those pretty charts to the right?
Let's dive deeper so you're prepared for that possibility.
2016 年 11 月 10 日
电缆测试 101：Understanding Your LinkWare Report
So you used your DSX-5000 to test some recently installed copper network runs for your customer. You can easily see on your tester if the link failed or passed for the application you were testing, but now your customer wants a customized report showing the detail.
2016 年 11 月 3 日
2016 年 10 月 20 日
电缆测试 101：There's No Gain with "Gainers"
Akin to water flowing from a small pipe into a large pipe, gainers are essentially perceived increases in optical power that occur at splice points due to variations in fiber characteristics, including core diameter, numerical apertures, mode field diameters and backscatter coefficients.
2016 年 10 月 13 日
